Shock explosion proof

JACOB Tubing’s products has been regularly tested for use in potentially explosive environments since 1980. The products are examined for their shock explosion resistance by means of a gas explosion, dust explosion or stress analysis. The results are documented in test reports from our external partners such as DEKRA GmbH and Inburex Consulting GmbH.

Shock explosion proof up to 1 bar overpressure – pull-ring connection

Tubes and press-formed components up to DN 315 with a wall thickness of 1 to 1.5 mm with (Quick Connect) pull-ring connections made of mild steel and stainless steel were tested.

  • Tubes up to 2 m
  • Tubes with spigots up to 200 mm
  • T-pieces
  • Segments 5 °, 15 °, 30 °, 45 °
  • Tube bends 1D 90 °, 2D 30 ° / 45 ° / 60 ° / 90 °
  • Forks
  • Symmetrical forks 60 °, 90 °
  • Cone pieces

You can find more information in our catalog or in the technical information.

Technical information: 1 bar shock-explosion resistance – pull-ring connection

Shock explosion proof up to 3 bar overpressure – pull-ring connection

Pipes and press-formed components up to DN 315 with a wall thickness of 1.5 to 2 mm with (Quick Connect) pull-ring connections made of mild steel and stainless steel were tested.

  • Tubes up to 2 m
  • Tubes with spigots up to 200 mm
  • T-pieces
  • Segments 5 °, 15 °, 30 °, 45 °
  • Tube bends 1D 90 °, 2D 30 ° / 45 ° / 60 ° / 90 °
  • Forks
  • Symmetrical forks 60 °, 90 °
  • Cone pieces

You can find more information in our catalog or in the technical information.

Technical information: 3 bar shock-explosion resistance – pull-ring connection

Shock explosion proof up to 10 bar overpressure – angle flange connection

Tubes and press-formed components up to DN 300 with a wall thickness of 2 mm with angle flange connections made of mild steel were tested.

  • Tubes up to 2 m
  • Inspection T-pieces
  • Tube bends 2D 30°, 45°, 60°, 90°
  • Forks 

You can find more information in our catalog or in the technical information.

Technical information: 3 bar shock-explosion resistance – loose flange connection

Shock explosion proof up to 3 bar overpressure – loose flange connection

Tubes and press-formed components up to DN 315 with a wall thickness of 2 to 3 mm with loose flange connections made of mild steel and stainless steel were tested.

  • Tubes up to 2 m
  • T-pieces
  • Segments 5° / 3,5D, 15° / 1,5D, 30° / 1,25D, 45° / 1D
  • Tube bends 1D / 2D 30°, 45°, 60°, 90°
  • Forks
  • Symmetrical forks 60°
  • Cone pieces 30°

You can find more information in our catalog or in the technical information.

Technical information: 10 bar shock-explosion resistance – angle flange connection

In order to maintain the shock explosion proof, the tubing parts in operation must be checked regularly for wear and corrosion. Deteriorated components must be replaced.

Do you have any questions concerning our products? Our sales experts are at your disposal!

Do you have any questions concerning our products? Our sales experts are at your disposal!

Discover our standard range

Product catalog

Learn about our standard components in our PDF catalog

Products online

Discover our standard range in our product section